LINKS
ABOUT

Station Innovation Pty Ltd

ABN 64 600 376 529

info@stationinnovation.com.au

1300 781 134

SOCIAL
  • Facebook Social Icon
  • YouTube Social  Icon
  • Twitter Social Icon
australia.png
australia.png
australia.png

© 2019 Station Innovation Pty Ltd

Watch the Video

Watch this short video and see how easy it really is!
  • Plug in your sensor

    • No matter what sensor you are using simple insert it into any of the ports on your EcoSAT

    • Tighten up the thread and it's ready to go. ​

    • If you are using a sensor such as an electric fence or water level sensor they will need to be setup accordingly. ​​

  • Take the top cover off

    • There are 4 screws on the top lid that hold it in place stopping the lid from being knocked off by cattle or blown off in the wind.

    • The screws are located under the four clip off covers pictured on the right.

    • Remove the screws and the lid will simply lift off.

    • Stop the unit from going anywhere by screwing or bolting it down using pre-drilled holes

    • Complete metalwork mounting kits are available to make this easier​, but the standard installation does not require it.

  • Switch the unit on

    • Under the cover there is a switch to power the unit.

    • Switch it to the on position and the unit will beep to indicate is has powered up.

 

  • Replace the cover

    • Reinstall the four fixing screws and clip-on dust caps. ​

Make EcoSAT Work for you!

EcoSAT is designed for everyone. You don't need to be in the office all day - get notified on the go!

  • Receive SMS notifications to your phone, on the hour or when it happens

  • Get an email notification on your phone or office computer.​

  • Have a robotic voice caller tell you in person where the problem is.

EcoSAT

An alarms has been detected on 'main cattle trough'.

Read what other people have to say

EcoSAT has been helping people manage their properties for years. See what some of our happy customers have to say about how they use their EcoSAT to help them.